A SERVICE OF

logo

Scanner Parameters 6-85
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Stop Bit Select
Parity Parameter Default Value 1
The stop bit(s) at the end of each transmitted character marks the end of transmission of one
character and prepares the receiving device for the next character in the serial data stream.
The number of stop bits selected (one or two) depends on the number the receiving computer is
programmed to accommodate. Set the number of stop bits to match host device requirements.
Set this parameter by scanning one of the following barcodes.
One Stop Bit
1 Stop Bit
Two Stop Bits
2 Stop Bits