A SERVICE OF

logo

Scanner Parameters 6-45
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Convert I 2 of 5 to EAN-13
Parameter Default Value: Disable
A successful barcode conversion requires the following to be true:
Interleaved 2 of 5 scanning is enabled.
One of the I 2 of 5 lengths is set to 14.
The barcode has a leading zero.
The barcode has a valid EAN-13 check digit.
When enabled, the parameter converts a 14 character I 2 of 5 barcode into EAN-13 and transmits it
to the host as EAN-13.
Set this parameter by scanning either of the barcodes shown below.
Enable
Convert I 2 of 5 to EAN
-
Disable
Do Not Convert I 2 of 5