A SERVICE OF

logo

Endcaps 1-17
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Endcaps
Refer to the "MX3-CE Operator’s Guide (LXE DocID MX3CEA136OPGDWW) for
the section titled “Scanner Warnings and Labels” for important laser safety
information before using the scanner.
The MX3-CE supports three COM port options. Two external serial ports are dependent on the
end cap chosen. A third serial port is used to support an infrared transceiver (barcode reader). An
additional endcap configuration supports serial and USB "slave" input/output at 1.5 Mbps.
Note: The USB port requires a DB9 to USB cable.
Scanner Port
RS-232 Port (Serial Port)
DC Power Jack
Audio Jack