Scanner Parameters 6-55
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Length Within Range
This option decodes a code type within a specified minimum and maximum range. For example,
when you want to scan only MSI Plessey symbols containing between 4 and 12 characters, scan the
“MSI Plessey Length Within Range” barcode and then “0”, “4”, “1” and “2” barcodes using the
“Keypad Number Symbols” at the end of this chapter.
To begin setting lengths within a range, scan this barcode:
MSI Plessey - Length within Range
Next, scan numeric barcodes that correspond to the desired value. Single digit numbers must have
a leading zero. If you wish to change your number selection, scan Cancel on the “Keypad Number
Symbols” page.
Any Length
This option decodes MSI Plessey barcodes containing any number of characters.
Note: Selecting this option may lead to misdecodes for MSI Plessey codes.
To set any length, scan this barcode:
MSI Plessey - Any Length
Transmit MSI Plessey Check Digit
Parameter Default Value: Disable
When enabled, the check digit is transmitted with the data.
Set this parameter by scanning either of the barcodes shown below.
Enable
Transmit MSI Plessey
Disable
Do Not Transmit MSI Pl
