A SERVICE OF

logo

PCMCIA Cards 1-21
E-EQ-MX3CERG-A-ARC MX3-CE Reference Guide
Installation
1. Slide the PC Card, connector side first, into the slot until it seats. Use caution not to pull or
snag the antenna connector.
2. If the PC Card is difficult to seat in the slot, remove the card, turn it around and re-install.
Removal
1. Grasp the top of the PC Card and pull it straight upward to remove.
2. Use caution not to pull or snag the antenna connector on the Radio card, if installed.
If you anticipate keeping the PC card out of the MX3-CE for a long period of time place it in an
enclosed storage container. Store in an area that is protected from dirt, moisture, and electrostatic
contact.