Filter
Top Products
Groundsmaster 5910Operator Cab Page 9 -- 14
6. Connect wire harness connectors to fan motor and
binary switch on drier--receiver.
7. Make sure that all machine air conditioning compo-
nents are installed and secure.
8. Have a certified air c onditioning service technician
evacuate the air conditioning system completely, prop-
erly recharge the system with R134a refrigerant and
then leak test the system. A/C system capacity is 1.25
pounds of R134a refrigerant.
9. Operate the heater system to make sure that no
coolant leaks exist.
10.Lower and secure roof assembly (see Roof Assem-
bly Installation in this section).
1. Fan motor
2. Blower wheel
3. Evaporator/heater core
4. Expansion valve
5. Freeze switch
6. Resistor guard
7. Bottom housing
8. Top housing
9. Resistor
Figure 12
2
1
3
4
7
8
6
5
9
2