78 Touchscreen
VX5 Reference Guide E-EQ-VX5RG-G-ARC
Touchscreen
Calibrating the Touchscreen
Although the touch screen is installed and calibrated at the factory, users may make adjustments to
it by using the Fujitsu Touch Panel on the Microsoft Windows Programs menu. To calibrate the
touchscreen, select Start | Programs | Fujitsu Touch Panel (USB) | Touch Screen Calibration
Utility.
Figure 3-2 Touchscreen Calibration, Targets
The calibration utility displays a red cross on the screen. Touch the center of the cross with the
stylus and hold for a few seconds. Release and repeat with the next cross. After all twelve
locations have been touched, either press <Enter> or click the Calibration button.
Figure 3-3 Touchscreen Calibration, Save and Exit
To save the new calibration settings, click on the Save & Exit button or press <Enter>.
To discard the new calibration settings, click Cancel & Exit or press <Esc>.
