72 BIOS Setup
VX5 Reference Guide E-EQ-VX5RG-G-ARC
Exit Menu Options
To edit parameters, use the up and down arrow key to move from parameter to parameter.
Press F1 to activate the help screen then use the panning function to move around the help screen.
Press ESC to close the help screen.
Use the left and right arrow keys to move from menu to menu.
Press the ESC key or key sequence to go directly to the Exit Menu.
As changes are made to Setup values, the values can be saved or discarded. The next time the
VX5 is turned on or rebooted, the saved values take effect.
Exit Saving Changes
Use this option to immediately save current Setup settings to CMOS RAM and into the Flash Boot
Device (FBD).
When “Save and Exit” is highlighted, press <Enter> to save. When the saving process is
complete, the VX5 reboots with the current values.
Exit Discarding Changes
Use this option when any current changes made to Setup parameters are to be ignored. The
parameters revert to their state when Setup was entered.
When this option is highlighted, press <Enter> and the boot process continues. The system
reboots with unchanged values.
Load Setup Defaults
This option is used to reset the Setup values to the original, default values that were set at the
factory, before suppliers or end users made changes.
The next time the VX5 is turned on or rebooted, those saved values are in effect. Save this
change by selecting “Save and Exit.”
Discard Changes
Use this option to immediately restore CMOS RAM and update the current Setup settings from
the Flash Boot Device.
Save this change by selecting “Save and Exit.”
Save Changes
Used to save BIOS Setup changes without rebooting. The changed parameters are in effect the
next time the VX5 is powered on or rebooted.
Reboot by selecting either “Exit w/o Save” or “Save and Exit.”
