A SERVICE OF

logo

PCMCIA/CardBus and ATA Slots 51
E-EQ-VX5RG-G-ARC VX5 Reference Guide
3. Before completely inserting the 2.4GHz Radio, connect the Antenna Cable to the 2.4GHz
Radio, using the port(s) indicated below:
Summit CF Radio Card
The Summit CF radio is installed on a PCMCIA adapter. Hold the radio card with the
antenna ports facing down. Connect the antenna cable(s) as follows:
Summit radio with single antenna – Connect antenna cable to Main port.
Auxiliary port is not used.
Summit radio with dual antennas – Connect antenna cables to both Main and
Auxiliary ports.
Auxiliary
P
o
r
t
Main
P
o
r
t
Figure 2-38 Summit Antenna Cable Connections
Cisco Radio Card
Cisco radio with single antenna – Connect antenna cable to right port, as shown
below.
Cisco radio with dual antennas – Connect antenna cables to both ports.
C
ISCO
S
Y
STEMS
CISCOAIRONET350
WIRELESS LAN ADAPTER
SERIES
Ri
g
ht Por
t
Left Port
Figure 2-39 Cisco Antenna Cable Connections