68 BIOS Setup
VX5 Reference Guide E-EQ-VX5RG-G-ARC
USB Port / USB Host Controller
These parameters determine if the USB port is active.
Available with BIOS revision MOD8R901 only.
Values: Enabled, Disabled
Default: Enabled
Note: The USB adapter cable must be attached to the VX5 to use the USB port.
USB BIOS Legacy Support
Enables support for USB keyboard and mice.
Values: Enabled, Disabled
Default: Enabled
Note: To boot from a USB floppy, USB BIOS Legacy Support must be enabled.
OnChip USB 2 device
Enables support for USB Ports 2 - 3.
Available with BIOS revision LXE0R100 only.
Values: Enabled, Disabled
Default: Enabled
Onboard Legacy Audio
Enables support for legacy audio devices.
Available with BIOS revision LXE0R100 only.
Values: Enabled, Disabled
Default: Enabled
Sound Blaster
Enables and configures the Sound Blaster device, only available when legacy audio devices are
supported.
Available with BIOS revision LXE0R100 only.
Values: Enabled, Disabled
Default: Enabled
When Enabled, The Base I/O address, Interrupt and 8-bit DMA channel must be specified.
MPU-401
Enables and configures the MPU-401 device, only available when legacy audio devices are
supported.
Available with BIOS revision LXE0R100 only.
Values: Enabled, Disabled
Default: Disabled
When Enabled, The MPU I/O address must be specified.
