176 Cisco Radio
VX5 Reference Guide E-EQ-VX5RG-G-ARC
Figure 4-63 Wireless Network Properties, Association Tab
Enter the SSID in the Network Name (SSID) text box.
Select WPA from the Network Authentication pull down list. For WPA/PSK see “WPA PSK
Configuration”, later in this chapter.
Select TKIP from the Data Encryption pull down list.
To configure authentication, click the Authentication tab at the top of the screen.
To continue with the authentication process, please refer to the appropriate section, later in this
chapter, for the desired authentication protocol:
• “PEAP/MS-CHAP Configuration”
• “PEAP/GTC Configuration”
• “WPA/LEAP Configuration”
• “EAP-TLS Configuration”
• “WPA/PSK Configuration”
