BIOS Setup 63
E-EQ-VX5RG-G-ARC VX5 Reference Guide
Main Menu Options
To edit parameters, use the up and down arrow key to move from parameter to parameter.
Use the space key or an alpha-numeric key to modify a parameter value.
Press F1 to activate the help screen. Then use the panning function to move around the help
screen. Press ESC to close the help screen.
Use the left and right arrow keys to move from menu to menu.
Press the ESC key or key sequence to go directly to the Exit Menu.
When changes have been made, press an arrow key to go to another parameter or menu or press
ESC to go to the Exit Menu.
Menu Option Default Value
System Time
System Date
Legacy Diskette (A: and B:) Disabled
Primary Master Auto
Primary Slave Auto
Secondary Master Auto
Secondary Slave Auto
Memory Shadow ---
Memory Cache ---
System Memory 640KB
Extended Memory 252928KB
BIOS Date (LXE0R100 only) 09/14/06
Settings are saved temporarily as each parameter activity screen is closed. Changes are saved to
CMOS RAM when “Save and Exit” is selected and the BIOS Setup program closes.
Changed and saved parameter values take effect after the VX5 is rebooted.
Note: The secondary drive is either an ATA Compact Flash or ATA PCMCIA card. Please
refer to “ATA Secondary Drive” later in this chapter for more information.
Legacy Diskette (A and B)
This option is used to indicate if a floppy disk drive is attached to the VX5. The VX5 does not
have a provision for a standard floppy drive; however, a USB floppy may be attached to the USB
interface cable.
Values:
Disabled No floppy drive present.
360KB 5¼” The option chosen will depend
1.2MB 5¼” on the drive attached. Most
720KB 3½” common are 1.44MB 3½” drives.
1.44/125MB 3½”
2.88MB 3½”
Default: Disabled
