A SERVICE OF

logo

Cisco Radio 185
E-EQ-VX5RG-G-ARC VX5 Reference Guide
Validate Server Certificate
Install the Root CA or trusted CA that issued the ACS server certificate. Please see “Installing a
Root CA Certificate” earlier in this chapter for instructions.
Navigate to the Wireless Network Settings screen.
Click the Authentication tab then the PEAP Properties box.
Check the Validate server certificate box.
From the drop down box choose the CA Root certificate.
Figure 4-79 PEAP Properties Certificate Authority
Check the Connect only if server is signed by specified root CA box.
Click OK to dismiss the configuration screens.
The root CA will be validated only when the radio re-connects with the new wireless parameters
in this configuration.