Symbol Radio 203
E-EQ-VX5RG-G-ARC VX5 Reference Guide
• 128-bit shared Key algorithm – Select 128-bit encryption, enter a 26 hex digit key
in the boxes and click the OK button to enable 128-bit encryption. Use the Reset
Keys button to clear any entered keys. The 128-key encryption provides greater
security over the 40-key encryption.
Figure 4-104 Symbol Profile – 128 bit Encryption
Up to four keys may be specified for each type of encryption. Selecting the “Adapter will use this
key” checkbox for one key deselects all other keys.
The Reset Keys button resets the keys to factory default values.
Note: The hex digits are visible after the key is set. After the key values are set for the network,
the digits are replaced with asterisks (*).
If the access point is using a passkey, then the active profile must use one too. The passkey is a
plain text representation of the WEP keys, providing an easy way to enter WEP data without
remembering the entire WEP key.
