214 Startup Problems
VX5 Reference Guide E-EQ-VX5RG-G-ARC
Startup Problems
This section lists some of the configuration error messages that may appear at system startup and
their possible solutions.
Note: If you press the power switch and the VX5 remains off, refer to the “Power Source”
section of this chapter.
Problem Solution
VX5 computer stops working
and locks up each time you
start it.
There may be a problem with a Microsoft Windows driver. To
recover from this error, follow the steps in the “Bypassing
Microsoft Windows Startup” section of this chapter.
The VX5 displays the “Non-
System disk or disk error“
message.
Make sure the VX5 is booting from the proper drive. To
recover from this error, follow the steps in the “Verifying Boot
Order” section of this chapter.
The VX5 displays either
“CMOS time and date not
set“ or “Real time clock
failure“ messages.
There may be a problem with the CMOS battery. Follow the
steps in the “Setting System Time and Date” section of this
chapter.
