Filter
Top Products
1 - 12 92B/96B/99B/105B Users Manual
STEPPING THROUGH A WINDOW
When a window appears, the assignments to the function
keys change as follows:
is the 'CLOSE' key, which closes the active window.
is the 'CANCEL' key, which ignores changed
selections and closes the active window.
is the 'SELECT ITEM' key, which opens and closes a
list box and selects the highlighted item.
Stepping through a window has a fixed sequence as
shown in Figure 1-7.
Figure 1-7. Sequence to Go Through a Window
The fixed sequence is as follows:
1. Press a MORE function key. This opens a
window.
(Press (NEXT PAGE) or (PREVIOUS PAGE) to
choose an item on page 2 or page 3.)
2. or Choose the item that has to be changed.
3. Open the list box.
4. or Choose the new parameter.
5. This selects the new parameter and closes the
list box.
Repeat steps 2 through 5 for more items.
6. Close the window and continue measurements.