Fluke 105B Telescope User Manual


 
9 - 8 92B/96B/99B/105B Users Manual
METER, , DIODE, and EXTERNAL mV
MODE FUNCTIONS
Smooth .... Moving average of readings for about last 8 sec.
Normal........<3.5 seconds response time for inputs >50 Hz
Fast .................<1 second response time for inputs >50 Hz
Change Alert™ .........Audible beep when reading changes
Touch Hold .......Audible beep & hold of last stable reading
Relative .......... Zeros present reading as a reference value
% Change...............% change relative to a reference value
% Scale .................% of user set 0% and 100% references
Min Max..........Simultaneous display of present, maximum,
minimum, and average values with time
Min Max TrendPlot™
Logs minimum, maximum, and average readings to
memory at full accuracy and displays all three as graphs.
Uses automatic vertical scaling and horizontal time
compression for hands-free recording from 120 seconds to
40 days full screen.
Minimum, maximum, and average full accuracy (16 bit)
waveforms available to PC interface
.
MEMORIES (SAVE OR RECALL)
Screen...................all displayed waveforms, readings, and
setup, 10 for Fluke 99B and 105B, 5 for Fluke 96B
Waveforms ....................individual waveforms with setting,
20 for Fluke 99B and 105B, 10 for Fluke 96B
Setups ....................................... complete test tool setting,
40 for Fluke 99B and 105B, 20 for Fluke 96B
SIGNAL GENERATOR
Sine Wave ............................................ 1V pk-pk at 976 Hz
Source resistance.................................................... 400
Square Wave.......5V pk-pk at 488 Hz, 976 Hz, or 1.95 kHz
Source resistance.................................................... 400
PROBE CALIBRATOR
AC probe adjust at 5pk-pk at 1.95 kHz
COMPONENT TESTER
Current Mode........................ 0 to +3 mA in max. 128 steps
Max. voltage......................................................................≤2V
Voltage Mode.........................-2V to +2V in max. 128 steps
Max. Current..................................................... +or- 1 mA
92B
96B
92B
92B 96B
92B 96B