Filter
Top Products
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć161
<Space>
?
TRIGger :
:
CH
VIDeo
MAIn
SOUrce
:
<x>
CH<x> specifies one of the input channels (CH1 or CH2).
TRIGGER:MAIN:VIDEO:SOURCE CH1
selects channel 1 as the source for the main video trigger.
TRIGger:STATE? (Query Only)
Returns the current state of the triggering system.
Trigger
TRIGger:STATE?
STATE
TRIGger :
?
REAdy indicates that all pretrigger information has been acquired and the
oscilloscope is ready to accept a trigger.
PARTial indicates that the main trigger has occurred and the oscilloscope is
waiting for the runs after" delay to complete.
TRIGger indicates that the oscilloscope has accepted a trigger and is acquirĆ
ing the posttrigger information.
AUTO indicates that the oscilloscope is in auto mode and acquires data even
in the absence of a trigger.
SAVE indicates that acquisition is stopped or that all channels are off.
ARMed indicates that the oscilloscope is acquiring pretrigger information. All
triggers are ignored when TRIGger:STATE is ARMed.
TRIGGER:STATE?
might return READY, indicating that pretrigger data has been acquired
and the oscilloscope is waiting for a trigger.
Arguments:
Examples:
Group:
Syntax:
Returns:
Examples: