Filter
Top Products
Command Descriptions
Syntax and Commands
2Ć114
NOVershoot is the negative overshoot, expressed as:
NOVershoot + 100
ǒ
(Low * Minimum)
Amplitude
Ǔ
NWIdth is the distance (time) between MidRef (usually 50%) amplitude
points of a negative pulse.
PDUTy is the ratio of the positive pulse width to the signal period expressed
as a percentage.
PERIod is the time, in seconds, it takes for one complete signal cycle to
happen.
PK2pk is the absolute difference between the maximum and minimum ampliĆ
tude.
POVershoot is the positive overshoot, expressed as:
POVershoot + 100
ǒ
(Maximum * High)
Amplitude
Ǔ
PWIdth is the distance (time) between MidRef (usually 50%) amplitude
points of a positive pulse.
RISe is the time that it takes for the leading edge of a pulse to rise from a low
reference value to a high reference value.
RMS is the true Root Mean Square voltage.
MEASUREMENT:IMMED:TYPE FREQUENCY
defines the immediate measurement to be a frequency measurement.
Examples: