Filter
Top Products
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć103
HORizontal:POSition
Positions the waveform horizontally on the display. This is used for both main
and delayed time bases. This command is equivalent to adjusting the frontĆ
panel HORIZONTAL POSITION knob or setting the position in the Horizontal
Position side menu.
Horizontal
HORizontal:POSition <NR3>
HORizontal:POSition?
:
POSition
HORizontal
?
<Space> <NR3>
<NR3> is from 0 to 99.9 and is the percent of the waveform that is displayed
left of the center graticule.
HORIZONTAL:POSITION 10
sets the horizontal position of the waveform such that 10% of the waveĆ
form is to the left of screen center.
HORizontal:REF<x>
Sets or queries the reference waveform position lock.
Horizontal
HORizontal:REF<x> { LOCk | INDEpendent }
HORizontal:REF<x>?
INDEpendent
HORizontal
REF<x>
:
LOCk
<Space>
?
LOCk locks the horizontal position of the reference waveform to the active
waveforms.
INDEpendent unlocks the horizontal position of the reference waveform and
allows it to be positioned independently.
HORIZONTAL:REF1 LOCK
locks the horizontal position of REF 1 to the active waveforms.
Group:
Syntax:
Arguments:
Examples:
Group:
Syntax:
Arguments:
Examples: