Filter
Top Products
Getting Started
Getting Started
1Ć10
H Delay Ċ sets the delay time before responding to a query. You can
set times from 0 to 60 seconds.
3. Press, in turn, each side menu button until the desired parameter setting
is displayed in the side menu, or press Set RSĆ232 Parameters to DeĆ
fault Values, if the default settings are appropriate.
4. Press the Hcp Port main menu button to display the Hard Copy Port side
menu. Then, if you want hardcopies to be sent via the RSĆ232 port, press
the RSĆ232C side menu button to select the RSĆ232 port as a remote
interface port (see Figure 1Ć12).
After these parameters are set, the RSĆ232 interface is ready to operate.
Figure 1Ć11:ăRSĆ232 Parameter Settings