Tektronix TDS 620A Sprinkler User Manual


 
Cursor Measurements
TDS 620A, 640A & 644A User Manual
3Ć17
In FastFrame mode, the @ shows the time position of the selected
cursor relative to the trigger point of the frame that the selected cursor is
in. The D shows the time difference between the two cursors only if both
cursors are in the same frame.
H Paired: the value after one D shows the voltage difference between the
the two Xs; the other D shows the time (or frequency) difference beĆ
tween the two long vertical bars. The value after @ shows the voltage at
the X of the selected cursor relative to ground (see Figure 3Ć11).
In FastFrame mode, the D shows the time difference between the two
cursors only if both cursors are in the same frame.
NonĆselected Cursor
(Dashed Line)
Selected Cursor
(Solid Line)
Cursor Readout (H Bars)
Figure 3Ć10:ăH Bars Cursor Menu and Readouts
Paired cursors can only show voltage differences when they remain on
screen. If the paired cursors are moved off screen horizontally, Edge will
replace the voltage values in the cursor readout.
To take cursor measurements, press CURSOR to display the Cursor menu
(Figure 3Ć10).
Function
Select the type of cursors you want using the Function menu item:
Press CURSOR Function (main) H Bars, V Bars, Paired,orOff (side).
Operation