Filter
Top Products
Reference
3Ć120
Saving and Recalling Setups
You may want to save and reuse setups for many reasons. For example,
after changing the setting during the course of an experiment, you may want
to quickly return to your original setup. You can save and recall up to ten
instrument setups from internal oscilloscope memory. The information is
retained even when you turn the oscilloscope off or unplug it.
To save the current setup of the digitizing oscilloscope:
1. Press SETUP ➞ Save Current Setup (main).
Before doing step 2 that follows, note that if you choose a setup
location labeled user, you will overwrite the user setup previously
stored there. You can store setups in setup locations labeled factory
without disturbing previously stored setups.
2. To store to a setup internally, choose one of the ten internal storage
locations from the side menu To Setup 1, To Setup 2, ... (see FigĆ
ure 3Ć63). Now the current setup is stored in that location.
Figure 3Ć63:ăSave/Recall Setup Menu
Operation