Filter
Top Products
Command Descriptions
Syntax and Commands
2Ć66
DATA:ENCDG RPBINARY
sets the data encoding format to be positive integer where the most
significant byte is transferred first.
DATA:ENCDG?
might return SRPBINARY for the format of the waveform data.
DATa:SOUrce
Sets or queries the location of the waveform data that is transferred from the
oscilloscope by CURVe?. The source data is always transferred in a predeĆ
fined order regardless of the order they are specified using this command.
The predefined order is CH1, CH2, MATH1, REF1, REF2.
Waveform
DATa:SOUrce <wfm>[<Comma><wfm>]...
DATa:SOUrce?
SOUrce
DATa :
<Space>
?
<wfm> <Comma> <wfm>
<wfm> is the location of the waveform data that will be transferred from the
oscilloscope to the controller.
DATA:SOURCE REF2, CH2, MATH1, CH1
specifies that four waveforms will be transferred in the next CURVE?
query. The order that the data will be transferred is CH1, CH2, MATH1,
then REF2.
DATA:SOURCE?
might return REF1, indicating the source for the waveform data that is
transferred using CURVE?.
Examples:
Group:
Syntax:
Arguments:
Examples: