Filter
Top Products
Command Descriptions
Syntax and Commands
2Ć96
HORizontal:DELay:SCAle
Sets the time per division for the delayed time base. This is equivalent to
setting Delayed Scale in the Horizontal Scale side menu.
Horizontal
HORizontal:DELay:SECdiv
HORizontal:DELay:SCAle <NR3>
HORizontal:DELay:SCAle?
:
SCAle
:
DELay
HORizontal
?
<Space> <NR3>
<NR3> is the time per division. The range is 10 ns (TDS 310), 5 ns (TDS 320),
or 2.5 ns (TDS 350) to5sina1-2-5 sequence. Values that are not in a
1-2-5 sequence is set to the closest valid value. If the delayed time base
scale is set slower than the main time base scale, both the main and delayed
time base scales is set to the delay scale value.
HORIZONTAL:DELAY:SCALE 2.0E–6
sets the delay scale to 2 ms per division.
HORIZONTAL:DELAY:SCALE 9.0E–6
sets the delay scale to 10 ms per division. Since 9 ms is not a valid value
within the 1-2-5 sequence, it is automatically set to the closest valid
value.
HORIZONTAL:DELAY:SCALE?
might return 1.0E–3, indicating that the delay time is 1 ms per division.
Group:
Related Commands:
Syntax:
Arguments:
Examples: