Tektronix TDS 310 Sprinkler User Manual


 
Command Descriptions
Syntax and Commands
2Ć64
DATa:DESTINATION
Sets or queries the reference memory location for storing waveform data that
is transferred into the oscilloscope by the CURVe command. This command
is identical to the DATa:TARget command.
Waveform
DATa:DESTINATION REF<x>
DATa:DESTINATION?
DATa
:
DESTINATION
?
<Space> <x>
REF
REF<x> is the reference memory location where the waveform will be stored.
DATA:DESTINATION REF1
stores incoming waveform data in reference memory 1.
DATA:DESTINATION?
might return REF2 as the reference memory location that is currently
selected.
DATa:ENCdg
Sets or queries the format of the waveform data. This command is equivalent
to setting WFMPre:ENCdg, WFMPre:BN_Fmt, and WFMPre:BYT_Or as shown
in Table 2Ć20. Setting the DATa:ENCdg value causes the corresponding
WFMPre values to be updated and vice versa.
Waveform
WFMPre:ENCdg, WFMPre:BN.FMT, WFMPre:BYT_Or
DATa:ENCdg { ASCIi | RIBinary | RPBinary | SRIbinary |
SRPbinary}
DATa:ENCdg?
Group:
Syntax:
Arguments:
Examples:
Group:
Related Commands:
Syntax: