Filter
Top Products
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć29
ENVelope specifies envelope mode, where the resulting waveform shows
the PEAKdetect range of data points from several separate waveform acĆ
quisitions. The number of waveform acquisitions that go into making up the
envelope waveform is set or queried using the ACQuire:NUMENv command.
ACQUIRE:MODE ENVELOPE
sets the acquisition mode to display a waveform that is an envelope of
many individual waveform acquisitions.
ACQUIRE:MODE?
might return ENVELOPE.
ACQuire:NUMACq? (Query Only)
Indicates the number of acquisitions that have taken place since starting
acquisition. This value is reset to zero when any Acquisition, Horizontal, or
Vertical arguments that affect the waveform are modified. The maximum
number of acquisitions that can be counted is 2
30
-1. This is the same value
that the oscilloscope displays in the upper left corner of the screen.
Acquisition
ACQuire:STATE
ACQuire:NUMACq?
ACQuire
:
NUMACq
?
<NR1>
ACQUIRE:NUMACQ?
might return 350, indicating that 350 acquisitions took place since an
ACQUIRE:STATE RUN command was executed.
Examples:
Group:
Related Commands:
Syntax:
Returns:
Examples: