Tektronix TDS 310 Sprinkler User Manual


 
Command Descriptions
Syntax and Commands
2Ć138
RS232:MODE?
always returns RAW.
RS232:PACE
Sets or queries the input and output soft flagging over the RSĆ232 port. This
command performs the same function as RS232:SOFTFlagging.
Miscellaneous
RS232: BAUD, RS232: HARDFLAGGING, RS232: PARITY, RS232: STOPBITS,
RS232?
RS232:PACE { XON | NONE }
RS232:PACE?
:
RS232
PACE
<Space>
XON
?
NONE
<XON> turn on softflagging.
<NONE> turn off softflagging.
RS232:PACE XON
turns on soft flagging.
RS232:PARity
Sets or queries the parity used for all RSĆ232 data transfers. When parity is
odd or even, the oscilloscope generates the selected parity on output and
checks all input against the selected parity. When parity is none, the oscilloĆ
scope performs no input parity error checks and generates no output parity.
When the parity (9th) bit does not match the parity type, the oscilloscope
reports a parity error. If another command is sent immediately after this comĆ
mand, without waiting for the parity to be programmed, the first couple of
characters may be lost.
Miscellaneous
RS232: BAUD, RS232: HARDFLAGGING, RS232:SOFTFLAGGING, RS232:
STOPBITS, RS232?
Examples:
Group:
Related Commands:
Syntax:
Arguments:
Examples:
Group:
Related Commands: