Filter
Top Products
TDS 310, TDS 320 & TDS 350 Programmer Manual
AĆ7
Appendix D: Factory
Initialization Settings
The factory initialization settings provide a known state for the oscilloscope.
Factory initialization sets values as shown in Table AĆ4.
TableĂAĆ4:ăFactory Initialization Defaults
Control Changed by Factory Init to
Acquire mode Sample
Acquire stop after RUN/STOP button only
Acquire # of averages 16
Acquire # of envelopes 8
Channel selection Channel 1 on, all others off
Cursor H Bar 1 position +3.2 divisions from the center
Cursor H Bar 2 position -4 divisions from the center
Cursor V Bar 1 position 10% of the graticule
Cursor V Bar 2 position 90% of the graticule
Cursor function Off
Cursor time units Seconds
Delay time, delayed runs after main 50 ms
Delayed, time base mode Delayed Runs After Main
Display format YT
Display graticule type Full
Display intensity - contrast 150%
Display intensity - text DIM
Display intensity - waveform BRIGHT
Display intensity - overall 85%
Display interpolation filter Sin(x)/x
Display style Vectors
Display trigger T" On
Display variable persistence 500 ms