Tektronix TDS 310 Sprinkler User Manual


 
Command Groups
Syntax and Commands
2Ć20
TableĂ2Ć15:ăTrigger Commands
Header
Description
TRIGger Force trigger event; return
parameters
TRIGger:MAIn Main trigger level to 50%
TRIGger:MAIn:EDGE? Return main edge trigger
parameters
TRIGger:MAIn:EDGE:COUPling Main trigger coupling
TRIGger:MAIn:EDGE:SLOpe Main trigger slope
TRIGger:MAIn:EDGE:SOUrce Main trigger source
TRIGger:MAIn:HOLDoff? Main trigger holdoff value
TRIGger:MAIn:HOLdoff:VALue Main trigger holdoff value
TRIGger:MAIn:LEVel Main trigger level
TRIGger:MAIn:MODe Main trigger mode
TRIGger:MAIn:TYPe Main trigger edge or video
TRIGger:MAIn:VIDeo:FIELD Video trigger field
TRIGger:MAIn:VIDeo:HOLdoff? Return video trigger holdoff
TRIGger:MAIn:VIDeo:
HOLdoff:VALue
Video trigger holdoff value
TRIGger:MAIn:VIDeo:SCAN Video trigger scan rate
TRIGger:MAIn:VIDeo:SOUrce Video trigger source
TRIGger:STATE? Trigger system status
Vertical commands control the display of channels and of main and reference
waveforms. The SELect:<wfm> command also selects the waveform to be
used by many commands in other command groups.
TableĂ2Ć16:ăVertical Commands
Header
Description
CH<x>? Return vertical parameters
CH<x>:BANdwidth Channel bandwidth
CH<x>:COUPling Channel coupling
CH<x>:INVert Invert channel
Vertical Commands