Filter
Top Products
Command Descriptions
Syntax and Commands
2Ć98
HORizontal:DELay:TIMe
Sets the delay time to wait after the main trigger before the delayed time base
begins. This is equivalent to setting Delayed Runs After Main in the HorizonĆ
tal Time Base side menu.
Horizontal
HORizontal:DELay:MODe
HORizontal:DELay:TIMe <NR3>
:
DELay
:
HORizontal
TIMe
?
<Space> <NR3>
<NR3> is the time, in seconds, between the main trigger and the delayed
trigger. The range is from one acquired sample interval to 50 s. Resolution
depends on the time base setting (see Table 2Ć22).
TableĂ2Ć22:ăHorizontal Delay Time Resolution
Time Base Setting
1
Delay Time Resolution
1 ms or faster 16.5 ns
2.5 ms 49.5 ns
5 ms 99 ns
10 ms 198 ns
slower than 10 ms one sample interval
(0.02 × the delayed time base setting)
1
When the horizontal delay mode is main only or intensified, use the main timebase
setting. When the horizontal delay mode is delayed only, use the delay timebase setting.
HORIZONTAL:DELAY:TIME 2.0E–3
sets the delay time between the main and delayed time base to 2 ms.
Group:
Related Commands:
Syntax:
Arguments:
Examples: