Filter
Top Products
Command Descriptions
TDS 310, TDS 320 & TDS 350 Programmer Manual
2Ć143
TERMinator
:
TRANsmit
:
RS232
<Space>
?
CRLf
LFCr
LF
CR
<CR> selects the carriage return character as the EOL terminator.
<LF> selects the line feed character as the EOL terminator.
<CRLf> selects the carriage return and line feed characters as the EOL
terminator.
<LFCr> selects the line feed and carriage return characters as the EOL
terminator.
RS232:TRANsmit:TERMinator CR
sets the carriage return as the EOL terminator.
*SAV (No Query Form)
(Save) Stores the state of the oscilloscope into a specified memory location.
You can later use the *RCL command to restore the oscilloscope to this
saved state. This is equivalent to selecting the Save Current Setup in the
Save/Recall Setup menu.
Save and Recall
FACtory, *RCL, RECAll:SETUp, SAVe:SETUp
*SAV <NR1>
<NR1>
*SAV
<Space>
<NR1> is a value in the range from 1 to 10 and specifies a location. Using an
outĆofĆrange value causes an execution error. Any settings that have been
stored previously at this location will be overwritten.
*SAV 2
saves the current settings in memory location 2.
Arguments:
Examples:
Group:
Related Commands:
Syntax:
Arguments:
Examples: