Filter
Top Products
TDS1000/2000-Series Digital Oscilloscope User Manual
v
General Safety Summary
Review the following safety precautions t o avoi d injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as spec ified.
Only qualified personnel should perform service procedure s.
To Avoid Fire or Personal Injury
Use Proper Power Cord. Use only the power cord specified for t his
product and certified for the country of use.
Connect and Disconnect Properly. Do not connect or disconnect probes
or test leads while they are connected to a voltage source.
Ground the Product. This product is grounde d through the grounding
conductor of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making
connections to the input or output terminal s of the product, ensure
that the product is properly grounded.
Connect the Probe Properly. The probe ground lead is at ground
potential. Do not connect the ground lead to an elevated voltage.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all
ratings and marking on the product. Consult the product manual for
further ratings informa tion before ma king connec tions to the product.
Do Not Operate Without C overs. Do not operate this product with
covers or panels removed.
Use Proper Fuse. Use only the fuse type and rating specified for t his
product.
Avoid Exposed Circuitry. Do not touch exposed connections and
components when power is present.
Do Not Operate With Suspected Failures. If you suspect there is damage
to this product, have it inspected by qualified service personnel .
Provide Proper Ventilation. Refer to the manual’s installation
instructions for details on installing the product so it has proper
ventilation.