Filter
Top Products
Reference
100
TDS1000/2000-Series Digital Oscilloscope User Manual
Edge Trigger
Use Edge triggering to trigger on the edge of the oscilloscope input
signal at the trigger threshold.
Options Settings Comments
Edge With Edge highlighted, the rising or falling
edge of the input signal is used for the
trigger
Source CH1
CH2
CH3*
CH4*
Ext
Ext/5
AC Line
Select the input source as the trigger
signal; see page 102
Slope Rising
Falling
Select to trigger on either the rising or
falling edge of the signal
Mode Auto
Normal
Select the type of triggering; see page 101
Coupling AC
DC
Noise Reject
HF Reject
LF Reject
Selects the components of the trigger
signal applied to the trigger circuitry; see
page 103
* Available only on 4-channel oscilloscopes.