Filter
Top Products
TDS2CMA Communications Module
150
TDS1000/2000-Series Digital Oscilloscope User Manual
Command Entry
When you enter oscilloscope commands over the RS-232 or GPIB
bus, follow these general rules:
H You can enter commands in upper or lower case.
H You can abbreviate many oscilloscope commands. These
abbreviations are shown in uppercase letters. For example, the
command ACQuire:NUMAVg can be entered simply as
ACQ:NUMAV or acq: numav.
H You can precede any command with white space characters.
White space characters include any combination of the ASCII
control characters 00 through 09 and 0B through 20 hexadeci mal
(0 through 9 and 11 through 32 decimal).
H The oscilloscope ignores commands that consist of just a
combination of white space characters and line feeds.
Refer to the TDS200-, TDS1000- and TDS2000-Series Digital
Oscilloscope Programmer Manual (071-1075-XX) for more
information.