Filter
Top Products
TDS2CMA Communications Module
TDS1000/2000-Series Digital Oscilloscope User Manual
143
1 No connection
2 Receive data (RxD) (input)
3 Transmit data (TxD) (output)
4 Data terminal ready (DTR) (output)
5 Signal ground (GND)
6 Data set ready (DSR) (input)
7 Request to send (RTS) (output)
8 Clear to send (CTS) (input)
9 No connection
12345
67 89
Setting Up and Testing the GPIB Interface
You may need to set up and test the module GPIB interface. GPIB is
an 8-bit parallel communications standard that lets the oscilloscope
communicate with an external device such as a controller, computer,
terminal, or printer.
Connecting to External GPIB Devices
Follow these guidelines when you connect your oscilloscope to a
GPIB network:
H Power off the oscilloscope and all external devices before
connecting the oscilloscope to the GPIB network.