Filter
Top Products
TDS2CMA Communications Module
128
TDS1000/2000-Series Digital Oscilloscope User Manual
CAUTION. Electrostatic discharge (ESD) can damage components in
the module and the oscilloscope. To prevent ESD, follow the next list
of precautions when installing, removing, or handl ing an module.
After removing a module, install the dummy module cover to protect
the contact pins.
H Always power down the oscilloscope before removing or
installing the module.
H Handle the module as little as possible.
H Transport and store the module in a sta tic-protected bag or
container.
H Do not slide the module over any surfac e.
H Wear a grounded antistatic wrist strap to discharge the static
voltage from your body while installing or removing a m odul e
from the oscilloscope.
H Do not touch the oscilloscope module connector pins.
H Do not use any devices capable of ge nerating or holding a static
charge in the work area where you install or remove the module.
H Avoid handling the module in areas that have a floor or
work-surface covering capable of generating a sta tic charge.
H Make sure that you install the module cover after you remove the
module.