Filter
Top Products
9
GETTING TO KNOW YOUR GRINDER (Continued)
Adjusts the speed of reel rotation when you
have the grind selector switch set at variable
speed spin.
GUARD DOORS MUST BE SHUT FOR SPIN
DRIVE TO OPERATE.
SPIN SPEED POTENTIOMETER DIAL RPM
SPIN DRIVE ROTATION SWITCH
Forward / Off / Reverse
This switch reverses the direction of the spin
drive motor.
IMPORTANT: Because the spin drive motor
can be flipped on the horizontal adjustment
arm, the direction may be opposite of what
is shown on the decal.
The green pushbutton is the system start switch. Pushing
it will engage the magnetic starter and power the control
panel. The magnetic starter will not engage unless the
emergency stop pushbutton is pulled out and the grinding
motor switch and spin motor switch are turned off.
SYSTEM START PUSHBUTTON
CONTROL PANEL COMPONENT IDENTIFICATION
Review the following control panel component descriptions before proceeding with the instructions
Variable speed spin
Switch must be up to perform
spin grinding operations.
Variable Torque Relief
Switch must be down to perform
relief grinding operations.
GRIND SELECTOR SWITCH