Filter
Top Products
10
GETTING TO KNOW YOUR GRINDER (Continued)
TRAVERSE MOTOR SWITCH
Turns the traverse drive motor ON/OFF.
TRAVERSE SPEED POTENTIOMETER
DIAL - FT / MIN
Adjusts the speed of the left & right
movement of the Grinding wheel.
PUSH-PULL EMERGENCY STOP BUTTON
Push in to cut all power to the control panel functions.
This removes power from all motors, including the
grinding motor, traverse motor, spin motor, etc. To
restore power, pull up on button and press the Start
button.
GRINDING WHEEL MOTOR SWITCH On / Off
Turn the Grinding Wheel Motor on and off.
GUARD DOORS MUST BE SHUT FOR GRIND
MOTOR TO OPERATE.
RELIEF TORQUE DIAL
Adjusts the Spin Drive Motor torque (the torque holding
the reel blade to the relief finger) when Grind Selector
Switch is set at variable Torque Relief.
TRAVERSE REVERSE SWITCH
Reverses the direction of the grinding
head if pushed when the head is moving.
SPIN MOTOR SWITCH On / Off
Turn the Spin Motor on and off.
GUARD DOORS MUST BE SHUT FOR GRIND
MOTOR TO OPERATE.
!
!