Filter
Top Products
Range Terms
Range terms bracket groups of bit patterns. There are two available Range
terms. Each Range term is assigned to either of the two analyzers, but not
both.
When you assign an upper and lower bit pattern boundary, the range is
recognized when the data is numerically between or on the two specified
boundaries. In addition, the range must be contained in a single pod pair,
with no clock bits allowed.
Range Assignment
To assign bit patterns to the upper and lower boundaries of a Range term,
you use a pop-up keypad. The keypad appears when you select the upper or
lower Range term assignment fields.
You can clear the range boundaries by setting them to all Xs (don’t cares) by
selecting the Range term field and selecting the Clear (=X) field from the
Resource Term Configuration menu. The Clear (=X) option places zeros and
Fs in the upper and lower boundaries respectively.
Range Term
The Trigger Menu
Range Terms
5–23