Filter
Top Products
Stop Measurement Field
The Stop measurement function allows you to specify a condition which
stops the analyzer measurement during a repetitive run.
When the Stop measurement field is selected, a Stop measurement type
selection pop-up menu appears with the choices of Off, X-O, or Compare.
Compare is only available if the analyzer type is State Compare. X-O is only
available if Count Time is turned on in the Trigger menu.
Off
The Off selection turns off all Stop measurement operations.
If a Compare Stop measurement is specified in this field, and Stop
measurement criteria are met, the measurement will stop even though the
Markers are set to Sample. An X-O Stop measurement will not complete if
Markers are set to Sample.
Stop Measurement Field and Pop-up Menu
Stop Measurement
field
The Chart Menu
Pattern
8–10