Filter
Top Products
Activity Indicators
Within each pod pair you’ll notice activity indicators for each bit of each pod.
These indicators appear in two places. One is in the pod pair displays of this
Configuration menu. The other place is in the bit reference line in the
Format menu just above the pod bit numbers.
When the logic analyzer is properly connected to an active target system,
you’ll see either a high-level dash, a low-level dash, or a transitional arrow in
the Activity Indicator displays for each pod pair. These indicators are very
useful in showing proper probe connections and that the logic levels are as
expected.
See Also
The "Bit Assignment Fields" in chapter 4, "The Format Menu," for more
information on the activity indicators.
Activity Indicators
The Configuration Menu
Activity Indicators
3–8