HP (Hewlett-Packard) HP 16555A Weather Radio User Manual


 
Inserting Waveforms
To insert waveforms from other modules, use the same procedure for
selecting waveforms as you would in the Waveform menu.
See Also
"Waveform Display" in chapter 7, "The Waveform Menu," for information on
the field definitions and the waveform selection functions.
Interleaving State Listings
Interleaved state listings allows you to view two labels and their data from
different analyzers in the same column. The process of interleaving state
listings can be performed in either the Listing menu or the Mixed Display
menu. For example, if data is interleaved in the Listing menu, it will be
automatically interleaved in the Mixed Display menu.
Before a state listing from a second analyzer can be interleaved into the
listing, both analyzers must be configured in a Group Run in the Intermodule
menu and the Count fields set to Time in both Trigger menus.
The interleaved label is placed directly above the selected label, and all
interleaved data is displayed in yellow. In addition, the state numbers of the
interleaved data are indented to the right. Because of the lack of room in the
listing portion of the Mixed Display menu, the label identifying the
interleaved data is not displayed.
State listings from an HP 16510B, 16540A/D, and 16550A analyzers can be
interleaved into the state listing of an HP 16554A or 16555A/D. However, the
HP 16510B will not accept state listings from the other products. With one
exception, the process to interleave a label is the same as inserting labels.
After the Interleave option is selected, an analyzer selection is made from a
list containing the analyzers configured in the Group Run. Labels for each
analyzer become available when the desired analyzer is selected.
The Mixed Display Menu
Inserting Waveforms
10–4