3
Printing Basics
3-8
Phaser 350 Color Printer
Using the Tektronix Driver for Windows 3.1
1.
From the Control Panel, double-click the Printers icon to open the
Printers dialog box.
2.
In the Printers dialog box, choose your printer from the list of
installed printers.
3.
Click the Setup button. A dialog box appears with the name of the
printer you selected across the top. Use this dialog box to select
paper source, paper size, image orientation, and number of copies.
Note
You may want to set the number of copies from your application
because the number of copies in the Setup dialog box remains the
same until you change it again. Also, if you are printing multiple
pages, make sure the Transmission Retry is set for at least
600 seconds (10 minutes), to avoid unnecessary timeouts.
4.
Click the Options button to see the Options dialog box.
5.
Click the Printer Features button to see the Tektronix Printer
Features dialog box. Make color correction, print quality, and
other selections as desired.
6.
Click OK until you return to the Printers dialog box, then
click Close.
