6
Troubleshooting
6-38
Phaser 350 Color Printer
Fonts printing incorrectly from Windows
If fonts are printing incorrectly from Windows, make sure you installed the
correct printer with either the Adobe PS3 driver for Windows 3.1, or with the
Windows 95 PostScript driver.
■ If you have the standard version of the printer, you should have
installed Tektronix Phaser 350.
■ If you have the printer’s Extended Features option, you should
have installed Tektronix Phaser 350 600x300 for Windows to
recognize and use all of the printer’s fonts.
If you select Tektronix Phaser 350 600x300 and you have only the
standard version of the printer with 17 fonts, any of the additional
fonts selected within an application are printed in the Courier
typeface.
If you are not sure which version of the printer you have, print a copy of the
printer’s startup page. The standard configuration has 17 fonts and
8 Mbytes of memory; the Extended Features option has 69 fonts and
24 Mbytes of memory. Refer to “Printing Help Pages from the front panel”
on page 2-29 for instructions on printing a startup page.
Refer to Chapter 2 for instructions on installing the printer and drivers.
