2
Getting Set Up
2-38
Phaser 350 Color Printer
7.
In the Install PostScript Printer from PPD dialog box, select the
directory and drive for the printer’s CD-ROM and the ADOBEPS4
directory. Select your printer, then click Next.
■ Select Tektronix Phaser 350 if you have the standard version
of the printer.
■ Select Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
8.
In the Local Port Selection dialog box, select the port you want to
use, then click Next. (You can configure the port in this dialog box
at any time.)
9.
In the Add Printer dialog box, type in the printer’s name, select
the printer as default, and decide if you want to print a test page.
Click Next to continue.
10.
If you see the Different Versions Detected dialog box, click Next
to update the files from the printer’s CD-ROM.
11.
When the installation is finished, the Tektronix Phaser 350
Properties dialog box appears. Make selections in the driver,
referring to Chapter 3 for more information on printer options.
Note
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM (USRGUIDE.PDF) for more detailed
information on the AdobePS 4 driver.
