3
Printing Basics
3-6
Phaser 350 Color Printer
Using the AdobePS 4 driver with Windows 95
To select printing options, follow these steps:
1.
In the Printers window, click the Phaser 350 printer icon with the
right mouse button, then select Properties from the menu.
2.
Click the following tabs to see printing options; refer to your
Windows 95 documentation for more information on tabs and
options.
■ Click the Details tab to see timeout and other options.
■ Set the Timeout settings.
Not Selected: Type a value of 0, or between 15 and 999, in this
text box to change the number of seconds Windows waits
before notifying you that a printer is off-line. The default is
15 seconds.
Transmission Retry: On large or multiple-page documents
you may see an Alert message that the printer is no longer
accepting data before the job is completely sent to the printer.
When using a shared printer, you should set this option to a
larger value, such as 900 seconds (15 minutes) to avoid these
unnecessary timeouts. Type a value between 45 and 999 in
this text box; the default setting is 45 seconds.
■ Click the Paper tab to see media options, such as media sizes,
media trays, and media types.
■ Click the Graphics tab to see graphics options.
Note
Use the Print Quality selections in the Device Options tab
instead of the Resolution Options in the Graphics tab. See
page 3-5 for details.
Note
If you are using host color correction, you need to make selections
in the Graphics and Device Options tabs. Refer to the on-line
manuals on the printer’s CD-ROM for more information on host
color correction.
■ Click the Device Options tab to see printer-specific options, such
as color corrections.
