Using the Front Panel
7
User Manual
7-9
Selecting the cleaning page source
The printer picks sheets of paper from a designated media tray as part of its
self-maintenance and jam recovery routines. The default cleaning page
source for the printer is the upper tray. When the Lower Paper Tray
Assembly is installed, you can change the source of the cleaning page to the
lower tray to prevent the printer from using transparencies or letterhead
loaded in the upper paper tray.
You can change the cleaning page source through the front panel, by sending
a PostScript language file to the printer (refer to the printer’s CD-ROM), or
through the World Wide Web (refer to the PhaserShare Status Software User
Manual).
To change the cleaning page source from the printer’s front panel, follow
these steps:
1.
While the Ready message is displayed, press the Menu button.
The printer displays the first item in the setup menu:
Help Pages
<---- ----> Menu
2.
Using the left arrow (<----) or right arrow (---->) buttons,
scroll through the selections until the following message appears:
Printer Defaults
<---- ----> Menu
3.
Press the Menu button to access the printer defaults settings.
4.
Using the left arrow (<----) or right arrow (---->) buttons,
scroll through the selections until the following message appears:
Cleaning Page Source
<---- ----> Menu
