Getting Set Up
2
User Manual
2-35
8.
In the Install From Disk dialog box, do one of the following:
CD-ROM:
a.
Click Browse.
b.
In the Open dialog box select the Drive for the printer’s
CD-ROM.
c.
Select the \WIN95_NT directory under Folders.
d.
Click OK.
Diskette:
a.
Click Browse.
b.
In the Open dialog box select the Drive for the Printer
Software for Windows diskette.
c.
Click OK.
9.
A list of Tektronix printers appears. Select your printer in the list,
then click Next.
■ Select Tektronix Phaser 350 if you have the standard version
of the printer.
■ Select Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. See page 2-29 for instructions on printing a
copy of the printer’s startup page.
10.
Select the port your printer is connected to, then click Next.
11.
It is recommended that you use the default printer name shown
under Printer name. Click Yes if you want this printer to be the
default printer. Then click Next.
