4
Printing: Beyond the Basics
4-14
Phaser 350 Color Printer
Previewing with Check Print
This feature is available only with the printer’s Extended Features option.
When sending a multiple-page file to the printer through the driver, you can
select Check Print to preview the first page of the job and determine if the
job is printing as expected before proceeding with the remainder of the job.
This is especially useful when printing a large job.
The ability to access Check Print from the driver is enabled and disabled in
the printer’s front panel. You can also set the timeout in the front panel (the
timeout is the amount of time the printer will wait after sending the first
page of a file, before it continues with the remainder of the job).
By default, access to Check Print is enabled, with a default timeout of
5 minutes.
Refer to “Front panel menu map” on page 7-5 for information on navigating
the front panel menus. Use the following instructions to select the
Check Print option in the printer driver:
1.
Select Check Print in a supported driver:
■ Windows 95 PostScript driver:
Select Check Print options in the Printer features field in the
Device Options tab options.
■ Adobe PS3 driver for Windows 3.1:
Select Check Print options in the Features tab options.
■ LaserWriter 8.x driver:
Select the Check Print option in the Options dialog box available
by clicking the Options button in the Print dialog box.
■ Phaser 350 driver:
Select the Check Print option in the TekColor Options dialog box
available by clicking the TekColor button in the Print dialog box.
■ Phaser 350 GX driver:
Select the Check Print option in the TekColor printing extension in
the Print dialog box (or in the Printer Driver Defaults dialog box
available from the Printing menu).
